ResMed AirSense™ 10 Elite CPAP w/ HumidAir™ and ClimateLineAir™ Tube Option

Description

AirSense 10 Elite w/ HumidAir

The AirSense™ 10 Elite CPAP Machine with HumidAir™ Heated Humidifier is the premium single pressure machine in ResMed’s AirSense™ line of machines. The HumidAir™ humidification system is integrated with the machine so there are less parts to the system, making it 23% lighter than former models. The optional heated ClimateLineAir™ Tube enhances humidification and reduces rainout.

AutoRamp

The ResMed AutoRamp feature has been improved for even more convenience. No more pressing buttons to activate the ramp feature because ResMed AutoRamp with Sleep Onset Detection does the job for you. Ramp feature automatically enables with the detection of sleep beginning with a lower pressure. Once asleep the pressure gentle rises to the prescribed level as needed.

AirView

Get in the know about your PAP therapy with the ResMed AirView cloud-based PAP therapy management system. Instantly access your therapy progress and data, trobleshoot with the remote assist feature, and adjust settings as well.

HumidAir

The combination of the HumidAir heated humidifier and the ResMed AirSense 10 AutSet CPAP with HumidAir system sets this unit apart from all other brands. The humidification technology from ResMed is one of the most powerful and technically advanced available on the market to date. Optimal comfort is achieved with the HumidAir humidification feature through advanced environment detection and adjusting. No more wondering which setting or when to adjust because the ResMed AirSense 10 AutSet CPAP with HumidAir&trade Humidification System has you covered. The ClimateLineAir Tube is included and simply takes the ResMed humidification system up a notch. Condensation will be a distant memor with the ClimateLineAir Tube which eliminates the water buildup caused by environmental elements working against your PAP therapy.

EPR

The ResMed AirSense 10 AutSet CPAP with HumidAir also has intelligent algorithm with Easy-Breathe expiratory pressure relief (EPR) to dynamically adjust pressure for maximum comfort which has been a great source of comfort in other ResMed lines. Using ResMed’s time-tested APAP technology, AutoSet continually monitors breathing, adapting breath by breath to always deliver the lowest therapeutic pressure, improving comfort and sleep. The S9’s enhanced AutoSet algorithm now differentiates between obstructive and central sleep apneas (CSA) and responds appropriately. You can be confident that you’re always receiving optimal therapy at the lowest, most comfortable pressure.

Brief Overview

The AirSense 10 CPAP is a basic fixed-pressure CPAP machine that is designed to make therapy easy. It features an integrated humidifier and can be used with the ClimateLineAir heated tube for the optimal temperature and humidity delivered to your mask.

1. The user-friendly controls, intuitive interface and color LCD screen make it simple to navigate menus and customize comfort settings.
2. The AutoRamp feature delivers lower pressure until you fall asleep and then ramps up to your prescribed level.
3. The quiet Easy-Breathe motor makes for a peaceful environment for you and your bed partner.
4. The SmartStart function allows you to begin therapy as soon as you breathe into your mask. When you remove your mask, it stops automatically after a few seconds.
5. Advanced event detection provides valuable clinical insights for your doctor.

AirSense 10 Elite w/ HumidAir Features

• Consistent humidification throughout the night with the integrated HumidAir™ humidifier and optional ClimateLineAir™ heated tube with Climate Control technology can provide a more comfortable experience.
• The quiet Easy-Breathe motor makes for a peaceful environment for you and your bed partner.
• The user-friendly controls, intuitive interface and color LCD screen make it simple to navigate menus and customize comfort settings.
• The SmartStart™ function begins your sleep apnea therapy as soon as you breathe into your mask. When you remove your mask, it stops automatically after a few seconds.
• The built-in ambient light sensor adjusts to the brightness of the room. So if you need to get up during the night, the screen’s back light won’t disrupt your bed partner. The light also turns off automatically, so you can settle back to sleep without disturbance.

Impotant Tips

Humidifier Tips

Do not fill the water chamber past the max fill line as this could result in water entering and damaging the device. Allow the water chamber to cool for ten minutes after use before handling as it could be too hot to the touch. The water chamber should be washed weekly using warm water and a mild detergent, rinsed well, and allowed to dry out of direct sunlight. The standard water chamber included is not dishwasher safe and should only be hand washed.

Hose Tips

Either a 15mm (Slim) hose or a 22mm (Standard) hose may be used with the AirSense™ 10 line of machines. The machine must be changed to the proper setting to ensure accurate therapy pressure. Also available is the optional ClimateLineAir™ heated hose which will instantly activate the Auto Climate Control feature when connected to the machine.

A SlimLine™ hose is included with the purchase of the AirSense™ 10 Elite CPAP machine. The hose is found in the interior, zipped compartment of the travel bag. The zippered nook is located at the point where the cover meets the bottom of the travel bag at the back of the machine compartments.

AutoRamp™ Tips

The AirSense™ 10 CPAP machines feature AutoRamp™ technology. Unlike traditional ramp features that will slowly ramp up pressure over a set amount of time, AutoRamp™ will stay at the set starting pressure until it senses the user is asleep. The default starting pressure is 4 cm H2O. Once the user is asleep, it will then start ramping 1 cm H2O per minute until it reaches the full prescribed pressure. AutoRamp™ will always reach the full prescribed pressure within 30 minutes, so even if not asleep, the machine will start to ramp in 1 cm H2O increments every minute to reach the full prescribed pressure at the 30 minute mark. Additionally, the AirSense 10 CPAP machines can be set to a traditional ramp if needed, or turned off altogether.

SmartStart™ Tips

Per the manufacturer, the SmartStart™ technology may not function as intended when used with a nasal pillow mask and a pressure setting of 7 cm H2O or less. If the feature does not appear to be functioning, this comfort feature can be turned off. Please refer to the User Guide for more information.

Airplane Mode Tips

Please note, the AirSense Line of machines include a built in wireless modem giving the machine data transfer capabilities over a wireless cellular network. The wireless modem will automatically connect if the machine’s “Airplane Mode” is turned to “Off”. For privacy concerns, CPAP.com will ship the machine with airplane mode “On” so that sleep data information will not be transmitted unintentionally over the wireless network. If Airplane mode is turned “Off”, sleep data could be transmitted to ResMed’s servers.